Compare Prices - Makita 6349DWDE3 18v

Makita 6349DWDE3 18v Drill Driver

Makita 6349Dwde3 18v Cordless MXT Drill Driver

MXT is the future of drilling power and control; high speeds of up to 1,700rpm can be achieved within seconds. MXT is THE fastest, strongest drill range on the market at the moment.

The technology behind the MXT range or Makita Xtra Torque makes all this possible. The machines have 3 different speed settings for versatility and 16 torque settings, which in the 18 volt machine, delivers up to 80 Nm of torque. The amount of the torque the drill creates makes drilling through the hardest of materials really easy.
The extra torque is created by a rare earth magnet encased in their bodies, which helps to multiply the power and the torque. Drill Drivers in the range are also equipped with all metals gears and gear case which makes the motors extremely robust and have longevity, they also have quick change carbon brushes and a replaceable armatures, making these machines quick and simple to repair.

Features:
- Three Mechanical Gears
- Forward /Reverse Rotation
- Variable Speed Trigger
- Electric Brake
- Made in the UK

Specifications:
Max in Steel: - 13mm
Max in Wood: - 65mm
Torque Settings: - 16
Max Torque S /H: - 40 /80Nm
No Load Speed: - 3: 0 to 1700rpm, 2: 0 to 600rpm, 1: 0 to 300rpm
Net Weight: - 2.6Kg
Battery :- 18v 2.6Ah NiMh
Charging Time: - 70mins

Your Drill - Your Choice!

Fantastic examples of 12v Cordless Drill Drivers include the Black & Decker CP12KB 12v, Bosch GSR12-23 12v, DeWalt DC740KA 12v, Hitachi 12DVF3 12v, Makita 312DWDE3 12v, and the Ryobi CHD1201 12v

If 14.4v Cordless Drill Drivers are more your thing, then make sure to look at the Black & Decker CP142KB 14.4v, Bosch PSR 14.4v, DeWalt DC757KA 14.4v, the Hitachi DS14DVF3 14.4v,Makita 6280DWPE3 14.4v, or the Ryobi CCD-1441 14.4v

To cover your your 18v Cordless Drill Drivers requirements, go ahead and review the Black & Decker CD18CA 18v, Bosch GSR 18v Drill Driver, DeWalt DC729KA 18v Drill Driver, Hitachi DS18DMR 18v Drill Driver, the Makita BDF452RFE 18v Drill Driver or the Ryobi CHP-1802M One+ 18v Drill Driver

18v Drill Driver Safety

Cordless drill drivers are much less hazardous than corded or electric power tools as there is no lead for you to trip or fall over. Cordless power tools are much more accessible than corded tools as they allow you go anywhere and work in places that would ordinarily be inaccessible due to there being no power socket. Cordless drill drivers are becoming increasingly small and compact in design and are extremely easy to move around and transport. However, the size and weight of a cordless drill driver may vary depending on the battery type. Technological developments have allowed power tool manufacturers to produce cordless drill drivers that have the same voltage and power capacity as electric corded drill drivers.

There are many types of drill available today, rotary drills, drill drivers, hammer drills, SDS drills manufactured for drilling brick, concrete, masonry, metal and wood. You can select cordless or electric, when choosing an electric drill there are two voltages, 110 and 240. 110 volt power tools need a power tool transformer and are utilized mainly on building sites, 240 volt tools for home use could be utilized with a RCD circuit breaker for safety. Cordless drill drivers give more flexibility due to the fact that you do not have a mains lead to contend with.

An adjustable clutch is what separates electric from cordless drill drivers. Located just behind the chuck, the clutch disengages the drive shaft of the drill, making a clicking sound, when a preset level of resistance is reached. The result is that the motor is still turning, but the screwdriver bit isn't. A clutch provides you control so you don't strip a screw or overdrive it once it's tight. It also helps protect the motor when a lot of resistance is met in driving a screw or tightening a bolt. The number of separate clutch settings varies on the drill; better drill drivers have at least 24 settings. With that many clutch settings, you can really fine-tune the power a drill driver delivers. Settings with the lowest numbers are for small screws, higher numbers are for larger screws. Many clutches also have a drill setting, which allows the motor to drive the bit at full power.

The chuck is the attachment where the bit is inserted, having jaws that grip the bit. Drills come in 1/4", 3/8", and 1/2" sizes. This measurement is the chuck size and indicates the shaft diameter of the drill bits and accessories that will fit the drill. Chucks can be keyed (the jaws are tightened or loosened with a key) or keyless (the chuck can be tightened or loosened by hand). Keyless chucks offer two major benefits. If you have ever misplaced or lost a chuck key, you already know one of them. A keyless chuck will also allow drill bits to be changed more quickly. A real plus when you need to change from a drill bit to a screwdriver bit repeatedly or should you happen to be wearing gloves on the job. You can change the chuck in some keyless models with only one hand because the shaft locks when the trigger is off. In most models, however, you have to use both hands to turn the chuck in opposite directions. While you're in the shop change the bit on different drill drivers to see what style of keyless chuck you prefer.

Nickel-metal-hydride (NiMH) batteries represent the latest breakthrough in batteries. They're smaller and run longer than standard nickel-cadmium (Nicad) batteries. NiMH batteries also pose less of a hazard when it comes to disposal than Nicads because they don't contain any cadmium, which is highly toxic. Makita, Bosch, Hitachi and DeWalt offer NiMH batteries, and other manufacturers will soon produce these power cells too.

If a Li-ion battery is stored with too low a charge, there is a risk of allowing the charge to drop below the battery's low-voltage threshold, resulting in an unrecoverable dead battery. Once the charge has dropped to this level, recharging it can be dangerous. Some batteries therefore feature an internal safety circuit which will prevent charging in this state, and the battery will be for all practical purposes dead. In circumstances where a second Li-ion battery is available for a given device, it is recommended that the unused battery be discharged to 40% and placed in the refrigerator to prolong its shelf life. While the battery can be utilized or charged immediately, some Li-ion batteries will provide more energy when brought to room temperature.

When drilling deep or large holes, it is best to drill a small pilot hole first. This is very helpful when drilling deep holes because it's sometimes easier to keep the hole straight with a smaller bit. A larger bit will then normally follow the pilot hole. When drilling larger holes, especially in metal, the pilot hole opens an area in the metal to accommodate the tip of the larger bit so the cutting surfaces can more easily reach the uncut metal. Once you've drilled your hole, you'll probably find a burr on the back surface of your material. This can be removed by lightly drilling the back side of the hole with a larger bit. If the material is thin, such as sheet metal, instead of a burr you may find the material is actually distorted leaving a ragged hole. This be stopped by sandwiching the material between two pieces of wood before you drill the hole. As with all tools, exercise caution, wear safety equipment and learn to use the tools properly.

A drill without a drill bit is useless. A drill bit is the piece at the end of the drill that does the actual drilling. Drill bits come in a wide variety of sizes (diameter) and length. First you have to insert the bit into the drill. The end of the drill’s barrel has an opening. Insert the dull end of the drill bit into this hole. Now you have to tighten the drill bit into this hole so the bit is secure and does not come free. This is accomplished in one of two ways. The most traditional way is to use a chuck key. The chuck key is a small piece of petal shaped in a right angle. One piece of the key fits into the tightening collar around the bit. There is a hole there for that purpose. Then you simply turn the key clockwise tightening the collar over the bit. Turn it clockwise to tighten. Turn it counter-clockwise to loosen the collar and free the bit. When you do this make certain the drill is unplugged from its power source. This is a safety precaution. The second way does not include a chuck key. Instead there are usually two tightening collars. The bit is inserted in the outer most collar. Grasp this collar with one hand holding it steady. With a small bit of power provided by squeezing the trigger the loose collar spins freely and tightens the bit into the collar. If you want to tighten the bit the collar must spin clockwise. If you want to loosen the bit the collar must turn counter-clockwise. The direction of the collar’s spin is determined by moving a switch on the drill usually located near the trigger. Now your drill is ready to go. You now have the correct bit size and it is securely settled into the drill. You are ready to drill. First make certain the bit is the appropriate material for the material you are drilling. Select a bit manufactured for metal should you are drilling through metal and select a bit manufactured for wood when drilling through wood. Using the incorrect bit will damage the bit and perhaps not accomplish the task. Using a wood bit on metal often does not penetrate the metal. When you have marked on the material to be drilled where you want the hole mark it with a pencil or marker with a dot or ‘x’. Place the drill bit exactly on the mark, squeeze the drill trigger and give just the slightest push to the drill. Let the drill do the work. Be patient and don’t strain the drill bit through the hole. Try to keep the drill as perpendicular to the material as possible.

Screwdriver drill bits are manufactured to fit in rechargeable cordless drill drivers. These drill bits have a hexagonal shank and are ideal for drilling pilot holes but are limited by the low power of these type of screwdrivers and the limited size of small drill bits available. To sharpen use a drill sharpener, a grindstone jig or an oilstone.

DIY Safety tips:

Keep water away from anything electric. Don't even wash walls without turning off the power at the mains switch. Never be tempted to use a socket, plug or equipment which could still have water in or on it - allowing it to dry could mean the difference between life and death. Read manufacturer's instructions on extension cables - they could overheat should left coiled. Check an extension is appropriate for the appliance it is connected to.
When painting, or using any material that generates toxic fumes or dust, keep the room well ventilated. Never smoke while painting or standing close to a freshly painted area.

Take extra care when removing artex or textured paint from walls as these materials may contain asbestos. Safety precautions must be followed when handling and disposing of asbestos. Contact your local environmental health department for help.

Take extra care with old paint. Some old paint could give off harmful dust and pose a poisoning hazard should ingested by small children. You must not burn off old paint or rub it down with dry sandpaper or a power sander; you could clean up properly, using a high efficiency industrial vacuum cleaner with heavy duty filters. Have a basic First Aid kit accessible.

Be sure you know the correct way to use all the tools. Many have very sharp blades.

Cordless Drill Drivers