Compare Prices - Makita 6280DZ 14.4v

Makita 6280DZ 14.4v Drill Driver

Makita 6280DZ 14.4v Cordless Drill Driver

Features:
- Two mechanical gears
- Reverse / Forward rotation
- Variable speed trigger
- Electric Brake
- Job light

Specifications:
Max Steel: 10mm
Max Wood : 25mm
Torque Settings: S /H Nm 16; 20 /36
Max Size Wood Screw: No 14
No Load Speed: Hi 0-1200rpm, Low 0-350rpm
Net Weight: 1.6Kg

Excellent examples of 12v Cordless Drill Drivers include the Black & Decker CP12KB 12v Drill Driver, Bosch PSR 12v Drill Driver, DeWalt DC772KLV 12v Drill Driver, Hitachi 12DVF3 12v Drill Driver, Makita 6319DWDE3 12v Drill Driver, and the Ryobi CHD1202 12v Drill Driver

In Case 14.4v Cordless Drill Drivers are more ideal, then be sure to peruse the Black & Decker CD14CA 14.4v Drill Driver, Bosch PSR 14.4v Drill Driver, DeWalt DC728KA 14.4v Drill Driver[/LINK], the Hitachi DS14DVF3 14.4v Drill Driver,Makita BHP442RFE14.4v Drill Driver, or the Ryobi CCD-1441 14.4v Drill Driver

To adapt to your 18v Cordless Drill Drivers desires, go ahead and review the
Black & Decker CD18CA 18v, Bosch PSR18VE-2 18v, DeWalt DC759KB 18v, Hitachi DS18DMR 18v, the Makita BDF452z 18v or the Ryobi CCD-181M One+ 18v

The biggest advantage of the cordless drill driver over its powered partner is the freedom to be used anywhere, the downside of a battery drill is the harder you work the drill the speedier the battery runs out, so you have to make sure that you are buying the right voltage cordless drill driver for the job, there is no point in investing money into a 12 volt drill and expecting it to be able to drill fifty 16mm holes from one set of batteries because it won’t.

The Drills come in two standard sizes and they are SDS Plus (10mm) and SDS-Max (18mm). These sizes relate the size of the shank. SDS Plus is the most common and can withstand a hammer of up to 4Kg, and SDS Max for hammers over 5Kg. SDS Plus grips the drill bit in two places whereas SDS Max grip in three places. With the SDS drill you can use a chuck adaptor that when used enables the use of standard drill bits for rotary drilling. It is wise to avoid SDS Drills that do not have a safety clutch. If the drill bit jams and is unable to turn a safety clutch may stop the drill body from spinning. This spinning might cause severe damage to the wrist and arm with the possibility of the drill being yanked from your hand, jumping out of the hole and coming into contact with a part of the body. A safety clutch could be high on your list of required features.

Drills come in three distinct handle styles. The most popular cordless models have the T-handle style where the handle is placed close to the middle. The T-handle style distributes the weight for better balance and less wrist strain. Some people still prefer the more traditional pistol-grip style. The third style is the right-angle version, manufactured for use where space is restricted.

Drilling softwood, hardwood, metal, and masonry all require different drill speeds. Harder materials or larger drill bits have to be worked at lower speed. Conversely, softer materials and smaller drill bits might be used at higher speeds. Look for a drill with variable speed. Variable speed allows the user to control the bit speed, indispensable when you plan on working different materials and accessories.

Nickel-metal-hydride (NiMH) batteries represent the latest breakthrough in batteries. They're smaller and run longer than standard nickel-cadmium (Nicad) batteries. NiMH batteries also pose less of a hazard when it comes to disposal than Nicads because they don't contain any cadmium, which is highly toxic. Makita, Bosch, Hitachi and DeWalt offer NiMH batteries, and other manufacturers may soon produce these power cells too.

Check out drill drivers in DIY centres noting their weight and balance. Try out vertical and horizontal drilling positions to see how comfortable you feel. Contoured grips and rubber cushioning on some models make them very comfortable, even when you're applying direct palm pressure. While you're at it, see how easy it is to change clutch settings and operate the keyless chuck.

Drilling a hole isn't rocket science but it might be quite frustrating should you don't know how to do it. For example, should you try to use a wood auger bit to drill a hole in metal you'll ruin the bit, score the metal and possibly injure yourself in the process. Drilling a hole correctly, however, is something you might easily accomplish with a little practice.

A drill without a drill bit is useless. A drill bit is the piece at the end of the drill that does the actual drilling. Drill bits come in a wide variety of sizes (diameter) and length. First you have to insert the bit into the drill. The end of the drill’s barrel has an opening. Insert the dull end of the drill bit into this hole. Now you have to tighten the drill bit into this hole so the bit is secure and does not come free. This is accomplished in one of two ways. The most traditional way is to use a chuck key. The chuck key is a small piece of petal shaped in a right angle. One piece of the key fits into the tightening collar around the bit. There is a hole there for that purpose. Then you simply turn the key clockwise tightening the collar over the bit. Turn it clockwise to tighten. Turn it counter-clockwise to loosen the collar and free the bit. When you do this make certain the drill is unplugged from its power source. This is a safety precaution. The second way does not include a chuck key. Instead there are usually two tightening collars. The bit is inserted in the outer most collar. Grasp this collar with one hand holding it steady. With a small bit of power provided by squeezing the trigger the loose collar spins freely and tightens the bit into the collar. If you want to tighten the bit the collar must spin clockwise. If you want to loosen the bit the collar must turn counter-clockwise. The direction of the collar’s spin is determined by moving a switch on the drill usually located close to the trigger. Now your drill is ready to go. You now have the correct bit size and it is securely settled into the drill. You are ready to drill. First make certain the bit is the suitable material for the material you are drilling. Select a bit manufactured for metal should you are drilling through metal and select a bit manufactured for wood when drilling through wood. Using the incorrect bit may damage the bit and perhaps not accomplish the task. Using a wood bit on metal often does not penetrate the metal. When you have marked on the material to be drilled where you want the hole mark it with a pencil or marker with a dot or ‘x’. Place the drill bit exactly on the mark, squeeze the drill trigger and give just the slightest push to the drill. Let the drill do the work. Be patient and don’t pressure the drill bit through the hole. Try to keep the drill as perpendicular to the material as possible.

With their central point and two spurs, Bullet drills resemble spur point drill bits, but might be used in metal, wood and plastics. Unlike normal twist drills, the twisted flutes are ground away; making a truer, more accurate bit than normal twist drill bits. They cut a clean hole and cause little damage when they break through the back of the workpiece. Bit sizes range from 1.5 to 13 mm.

DIY Safety tips:

New appliances have to be supplied with a plug that is fused in accordance with manufacturers' instructions. Always follow manufacturers' recommendations for fuses, or seek expert advice. Check older appliances such as electric blankets and Christmas tree lights.
Store tools in a safe place, out of the way of children and pets. Keep them in a box or a rack. When using knives, always cut away from you. Use a baton as a guide and run a sharp knife along the edge of it. Always store knives securely.

Keep your head: should any of your tools has a loose head or handle, replace the whole tool or have it repaired by a professional. Keep a tool box tidy for easy access and always use the cover guards which come with tools such as saws, knives and chisel blades. Buy equipment and household appliances which are made to a British or European standard or carry an approved product quality and safety mark. There may be a label on the product.

Do not work with electricity in damp or wet conditions. If you MUST, always use an RCD. Always place the cable of a hedge trimmer or mower over your shoulder and keep it behind you at all times.

Wear safety goggles whenever there may be a danger of flying debris - for example when using power tools.

Cordless Drill Drivers