Compare Prices - Makita 6280DWPE3 14v

Makita 6280DWPE3 14.4v Drill Driver

Makita 6280DWPE3 14.4v Cordless Drill Driver

Features:
- Two mechanical gears
- Reverse / Forward rotation
- Variable speed trigger
- Electric Brake

Specifications:
Max: Steel - 10mm
Max: Wood - 25mm
Torque Settings: S /H Nm 16; 20 /36
Max Size Wood Screw: No 14
No Load Speed: Hi 0-1200rpm, Low 0-350rpm
Net Weight: 1.6Kg
Battery: 14.4v 1.3Ah NiCad
Charging Time: 30min

Fantastic examples of 12v Cordless Drill Drivers include the Black & Decker CP12KB 12v, Bosch PSR 12v, DeWalt DW965K 12v, Hitachi 12DVF3 12v, Makita 6319DWDE3 12v, and including the Ryobi CHD1201 12v

In the event that 14.4v Cordless Drill Drivers are more suitable, then make sure to check out the Black & Decker CD14CA 14.4v Drill Driver, Bosch GSR Tough 14.4v Drill Driver, DeWalt DC757KB 14.4v Drill Driver, the Hitachi DSDL Li-Ion 14.4v Drill Driver,Makita 6337DWDE3 14.4v Drill Driver, or the Ryobi CCD-1441 14.4v Drill Driver

For coverage of your 18v Cordless Drill Drivers requirements, go take a look at the
Black & Decker CD18CA 18v, Bosch PSR18VE-2 18v, DeWalt DC759KB 18v, Hitachi DS18DFL 18v, the Makita 6390DZ 18v or the Ryobi CHP-1802M One+ 18v

Drill Driver Safety

The variety of cordless drill drivers is now immense, and all mains powered drills have their cordless battery equivalents. 9.6 volt to 14.4 volt drill/drivers may be used as a rotary drill or screwdriver. 12 volt to 18 volt cordless drill drivers can also have a hammer action. 12 and 14.4 volt machines are ok on hammer action for brick but would struggle drilling concrete and other hard masonry, should you need the drill to do this type of work then you may look at the 18 volt models that are available. Then there are the 18 volt to 36 volt SDS type of drills. These are designed for masonry work, and with a chuck adaptor these may be turned into rotary drill drivers. Also with the SDS type of cordless drill you may get some of them with roto stop which then turns them into a demolition hammer drill.

There are numerous types of drill on the market place today, rotary drills, drill drivers, hammer drills, SDS drills designed for drilling brick, concrete, masonry, metal and wood. You may chose cordless or electric, when choosing an electric drill there are two voltages, 110 and 240. 110 volt power tools need a power tool transformer and are used mainly on building sites, 240 volt tools for home use may be used with a RCD circuit breaker for safety. Cordless drill drivers give more flexibility due to the fact that you do not have a mains lead to contend with.

Before cordless drill drivers arrived, many drills had pistol grips, where the handle is behind the motor like the handle of a gun. But many of today's cordless models are equipped with a T-handle: The handle base flares to stop hand slippage and accommodate a battery. Because the battery is centered under the weight and bulk of the motor, a T-handle provides better overall balance, particularly in heavier drills. Also, T-handle drills may often get into tighter spaces because your hand is out of the way in the centre of the drill. But for heavy-duty drilling and driving large screws, a pistol grip does let you apply pressure higher up — almost directly behind the bit — allowing you to put more force on the work.

Drilling softwood, hardwood, metal, and masonry all require different drill speeds. Harder materials or larger drill bits have to be worked at lower speed. Conversely, softer materials and smaller drill bits may be used at higher speeds. Look for a drill with variable speed. Variable speed allows the user to control the bit speed, indispensable when you plan on working different materials and accessories.

Depending on the choice of material for the anode, cathode, and electrolyte the voltage, capacity, life, and safety of a lithium ion battery may change dramatically. Lithium ion batteries are not to be confused with lithium batteries, the key difference being that lithium batteries are primary batteries containing metallic lithium while lithium-ion batteries are secondary batteries containing an intercalation anode material. Lithium-ion batteries can be formed into a wide variety of shapes and sizes so as to efficiently fill available space in the tools they power. Li-ion batteries are lighter than other equivalent secondary batteries, often much lighter.

Unlike Ni-Cd batteries, lithium-ion batteries may be charged early and often. However, should they are not used for a long time, they may be brought to a charge level of around 40% - 60%. Li-ion batteries may be kept cool. Ideally they are stored in a refrigerator. Aging may take its toll much faster at high temperatures. The high temperatures found in cars cause lithium-ion batteries to degrade rapidly. Storing a Li-ion battery at the correct temperature and charge makes all the difference in maintaining its storage capacity. It is significantly beneficial to avoid storing a lithium-ion battery at full charge. A Li-ion battery stored at 40% charge may last numerous times longer than one stored at 100% charge, particularly at higher temperatures.

Drilling a hole isn't rocket science but it may be quite frustrating should you don't know how to do it. For example, should you try to use a wood auger bit to drill a hole in metal you'll ruin the bit, score the metal and possibly injure yourself in the process. Drilling a hole correctly, however, is something you may easily accomplish with a little practice.

A drill without a drill bit is useless. A drill bit is the piece at the end of the drill that does the actual drilling. Drill bits come in a wide variety of sizes (diameter) and length. First you have to insert the bit into the drill. The end of the drill’s barrel has an opening. Insert the dull end of the drill bit into this hole. Now you have to tighten the drill bit into this hole so the bit is secure and does not come free. This is accomplished in one of two ways. The many traditional way is to use a chuck key. The chuck key is a small piece of petal shaped in a right angle. One piece of the key fits into the tightening collar around the bit. There is a hole there for that purpose. Then you simply turn the key clockwise tightening the collar over the bit. Turn it clockwise to tighten. Turn it counter-clockwise to loosen the collar and free the bit. When you do this make certain the drill is unplugged from its power source. This is a safety precaution. The second way does not include a chuck key. Instead there are usually two tightening collars. The bit is inserted in the outer most collar. Grasp this collar with one hand holding it steady. With a small bit of power provided by squeezing the trigger the loose collar spins freely and tightens the bit into the collar. If you want to tighten the bit the collar must spin clockwise. If you want to loosen the bit the collar must turn counter-clockwise. The direction of the collar’s spin is determined by moving a switch on the drill usually located close to the trigger. Now your drill is ready to go. You now have the correct bit size and it is securely settled into the drill. You are ready to drill. First make certain the bit is the suitable material for the material you are drilling. Select a bit designed for metal should you are drilling through metal and select a bit designed for wood when drilling through wood. Using the incorrect bit may damage the bit and perhaps not accomplish the task. Using a wood bit on metal often does not penetrate the metal. When you have marked on the material to be drilled where you want the hole mark it with a pencil or marker with a dot or ‘x’. Place the drill bit exactly on the mark, squeeze the drill trigger and give just the slightest push to the drill. Let the drill do the work. Be patient and don’t force the drill bit through the hole. Try to keep the drill as perpendicular to the material as possible.

Screwdriver drill bits are designed to fit in rechargeable cordless drill drivers. These drill bits have a hexagonal shank and are ideal for drilling pilot holes but are limited by the low power of these type of screwdrivers and the limited size of small drill bits available. To sharpen use a drill sharpener, a grindstone jig or an oilstone.

DIY Safety tips:

Although RCDs are a vital safety aid, they can't guarantee 100% protection. Even with them in your home, isn't it better to make a long term investment in good safety practice by looking after appliances such as hedge cutters, hedge trimmers, chainsaws, drill drivers and sanders. Do not work with electricity in damp or wet conditions. If you MUST, always use an RCD. Always place the cable of a hedge trimmer or mower over your shoulder and keep it behind you at all times.
When painting, or using any material that generates toxic fumes or dust, keep the room well ventilated. Never smoke while painting or standing close to a freshly painted area.

Ladders are one of the main causes of DIY accidents. Erect the ladder according to the manufacturer's instructions. Never lean to one side as you could lose balance. Don't rush as you're more likely to have an accident. Carefully plan the job before you start work. Know your limitations and consult a professional should you are unsure. It's also a good idea to ask someone should they can help you.

New appliances have to be supplied with a plug that is fused in accordance with manufacturers' instructions. Always follow manufacturers' recommendations for fuses, or seek expert help. Check older appliances such as electric blankets and Christmas tree lights. If a fuse blows for no obvious reason or an appliance is not working properly, turn off the appliance at the socket and unplug it before trying to find out why. The same principles apply to fuse boxes or circuit breakers - always turn off at the mains before you investigate and remember to replace the cover before switching back on. If you need to change a mains fuse, check the correct rating for that circuit - the blown fuse might have been incorrect in the first place. Using a thicker fuse wire than the correct rating is hazardous.

Only wash with proprietary skin cleaners. Do not use solvents or other chemicals. Do not eat, smoke or drink while handling materials and wash before meals and snacks. Never dispose of chemicals into the drains. Dispose of rubbish carefully. Lay oily rags out flat outside to dry to avoid the possibility of spontaneous combustion.

Cordless Drill Drivers