Compare Prices - Hitachi DS14DVF3/JE 14.4v

Hitachi DS14DVF3/JE 14.4v Drill Driver

Hitachi DS14DVF3/JE Drill Driver 14.4vcomprising a tool for the hardcore DIY enthusiast or professional user. Complete with 3 x 1.4Ah batteries and a 30 minute charger, you should have no reason for not being able to complete any task.

Drill Driver Features:

* Soft Grip Handle.
* Improved cooling efficiency gives greater overload durability.
* Maximum torque 34Nm giving a 13% increase on previous model.
* Electric brake.
* 22 stage torque adjustable settings.
* Five position belt hook with integral bit holder.
* Chuck capacity: 10mm
* Three 1.4Ah low profile batteries.

Box Contents
# Drill
# Kit box
# 3 x batteries
# 30 minute charger

Fantastic examples of 12v Cordless Drill Drivers include the Black & Decker CP12KB 12v Drill Driver, Bosch PSR 12v Drill Driver, DeWalt DC7442AV 12v Drill Driver, Hitachi 12DVF3 12v Drill Driver, Makita 6319DWDE3 12v Drill Driver, and including the Ryobi CHD1201 12v Drill Driver

If 14.4v Cordless Drill Drivers are better suited, then be sure to peruse the Black & Decker Lithium Ion 14.4v, Bosch GSR Tough 14.4v, DeWalt DC757KB 14.4v, the Hitachi DSDL Li-Ion 14.4v,Makita BHP442RFE14.4v, or the Ryobi CCD-1441 14.4v

To adapt to your 18v Cordless Drill Drivers desires, compare prices of the
Black & Decker CD18CA 18v, Bosch PSR18VE-2 18v, DeWalt DC759KB 18v, Hitachi DS18DL 18v, the Makita BDF452RFE 18v or the Ryobi CCD-181M One+ 18v

The main advantage of the cordless drill driver over its powered partner is the freedom to be used anywhere, the downside of a battery drill is the harder you work the drill the faster the battery runs out, so you have to make sure that you are buying the right voltage cordless drill driver for the job, there is no point in investing money into a 12 volt drill and expecting it to be able to drill fifty 16mm holes from one set of batteries because it won’t.

The Angle Drill is manufactured for use in tight areas. Their main feature is the angled neck. Unlike a conventional drill, an Angle Drills profile allows the drill to be used at arms length and in areas where the body of a drill would not allow it access. While they may not be able to deliver the power and torque of a conventional drill they are incredibly handy tools, especially around the home. An example would be drilling a hole on the inside of a drawer to mount a handle, positioning a normal drill could be awkward but the body of an Angle Drill would rise out of the drawer leaving plenty of space for the operators hand.

An adjustable clutch is what separates electric from cordless drill drivers. Located just behind the chuck, the clutch disengages the drive shaft of the drill, making a clicking sound, when a preset level of resistance is reached. The result is that the motor is still turning, but the screwdriver bit isn't. A clutch offers you control so you don't strip a screw or overdrive it once it's tight. It also helps protect the motor when a lot of resistance is met in driving a screw or tightening a bolt. The number of separate clutch settings varies on the drill; better drill drivers have at least 24 settings. With that many clutch settings, you can really fine-tune the power a drill driver delivers. Settings with the lowest numbers are for small screws, higher numbers are for larger screws. Most clutches also have a drill setting, which allows the motor to drive the bit at full power.

The chuck is the attachment where the bit is inserted, having jaws that grip the bit. Drills come in 1/4", 3/8", and 1/2" sizes. This measurement is the chuck size and indicates the shaft diameter of the drill bits and accessories that will fit the drill. Chucks can be keyed (the jaws are tightened or loosened with a key) or keyless (the chuck can be tightened or loosened by hand). Keyless chucks offer two major benefits. If you have ever misplaced or lost a chuck key, you already know one of them. A keyless chuck will also allow drill bits to be changed more quickly. A real plus when you need to change from a drill bit to a screwdriver bit repeatedly or should you happen to be wearing gloves on the job. You can change the chuck in some keyless models with only one hand because the shaft locks when the trigger is off. In many models, however, you have to use both hands to turn the chuck in opposite directions. While you're in the store change the bit on different drill drivers to see what style of keyless chuck you prefer.

Nickel-metal-hydride (NiMH) batteries represent the latest breakthrough in batteries. They're smaller and run longer than standard nickel-cadmium (Nicad) batteries. NiMH batteries also pose less of a hazard when it comes to disposal than Nicads because they don't contain any cadmium, which is highly toxic. Makita, Bosch, Hitachi and DeWalt offer NiMH batteries, and other manufacturers will soon produce these power cells too.

If a Li-ion battery is stored with too low a charge, there is a risk of allowing the charge to drop below the battery's low-voltage threshold, resulting in an unrecoverable dead battery. Once the charge has dropped to this level, recharging it can be dangerous. Some batteries therefore feature an internal safety circuit which will stop charging in this state, and the battery will be for all practical purposes dead. In circumstances where a second Li-ion battery is available for a given device, it is recommended that the unused battery be discharged to 40% and placed in the refrigerator to prolong its shelf life. While the battery can be used or charged immediately, some Li-ion batteries will provide more energy when brought to room temperature.

For many applications around the house a small set of common twist drill bits will normally serve your needs. You'll also need a drill to turn the drill bits and some tools to measure and mark where you want the hole. This includes a ruler or tape measure, a pencil or scribe and should working with metal, a centre punch and a hammer. The first and most important step is marking where you want the hole. You can also use a scribe on wood or plastic. Sometimes even a pencil will work well. As long as you can see your marks and they don't rub off when working your material it doesn't normally matter. Without a punch mark, the bit would drift around. If it did eventually catch, it would quite likely be in the wrong location.

To drill a satisfactory hole in any material, the correct type of drill bit must be used; it must be used correctly and be sharpened as suitable. Many jobs around the house require a hole of some kind to be drilled - whether it is putting up a shelf, building a cabinet or hanging a light fitting. For basic requirements, a set of high-speed steel twist drill bits and some masonry drill bits will probably be sufficient for the average handyman. But for more sophisticated jobs/material, others drill bits will be required - perhaps larger, or manufactured for a specific material/purpose. Good quality drill bits can be expensive, so take care of them, keep them in a case or box should possible, rather than allowing them to roll around loose in a toolbox where the cutting edges may be damaged.

Usually referred to as twist drill bits, twist bits are probably the many common drilling tools used by the handyman with either a hand or electric drill. The front edges cut the material and the spirals along the length remove the debris from the hole and tend to keep the bit straight. They can be used on timber, metal, plastics and similar materials. Most twist drill bits are made from either High Speed Steel (HSS) or Carbon Steel. High Speed Steel drill bits are suitable for drilling many types of material. When drilling metal the HSS stands up to the high temperatures. Carbon steel drill bits are specially ground for drilling wood and could not be used for drilling metals as they tend to be more brittle and less flexible than HSS drill bits.

DIY Safety tips:

Keep water away from anything electric. Don't even wash walls without turning off the power at the mains switch. Never be tempted to use a socket, plug or equipment which could still have water in or on it - allowing it to dry could mean the difference between life and death. Read manufacturer's instructions on extension cables - they could overheat should left coiled. Check an extension is suitable for the appliance it is connected to.
When fixing or checking electrical appliances or connections, always switch off the power and remove the fuse or circuit breaker (MCB). If you're fixing an electrical appliance, switch off the appliance at the socket and pull out the plug. Wear rubber-soled shoes when working on electrics. Cover electrical switches which are broken. Switch off at the mains and remove the fuse to that line, and keep it with you, so even should the power is switched on accidentally the line will stay dead and not you, while you carry out a job. The tapes are a reminder for you and a warning to others. Call in professional help should you do not know what you are doing.

Keep your head: should any of your tools has a loose head or handle, replace the whole tool or have it repaired by a professional. Keep a tool box tidy for easy access and always use the cover guards which come with tools such as saws, knives and chisel blades. Buy equipment and household appliances which are made to a British or European standard or carry an approved product quality and safety mark. There will be a label on the product.

New appliances have to be supplied with a plug that is fused in accordance with manufacturers' instructions. Always follow manufacturers' recommendations for fuses, or seek expert help. Check older appliances such as electric blankets and Christmas tree lights. If a fuse blows for no obvious reason or an appliance is not working properly, switch off the appliance at the socket and unplug it before trying to find out why. The same principles apply to fuse boxes or circuit breakers - always switch off at the mains before you investigate and remember to replace the cover before switching back on. If you need to change a mains fuse, check the correct rating for that circuit - the blown fuse might have been incorrect in the first place. Using a thicker fuse wire than the correct rating is dangerous.

Keep children and pets away from the work area. Store all tools and materials out of their reach. Many products are toxic.

Cordless Drill Drivers