18v Cordless Drill Drivers

Click to Compare Prices!!

Further Options

Fantastic examples of 12v Cordless Drill Drivers include the Black & Decker CP12KB 12v Drill Driver, Bosch PSR 12v Drill Driver, DeWalt DW965K 12v Drill Driver, Hitachi 12DVF3 12v Drill Driver, Makita 312DWDE3 12v Drill Driver, and including the Ryobi CHD1202 12v Drill Driver

If 14.4v Cordless Drill Drivers are more your thing, then be sure to take a peek at the Black & Decker CP142KB 14.4v Drill Driver, Bosch GSR Tough 14.4v Drill Driver, DeWalt DC731KBV 14.4v Drill Driver, the Hitachi DS14DVF3 14.4v Drill Driver,Makita 6280DWPE3 14.4v Drill Driver, or the Ryobi CHD-1441 14.4v Drill Driver

For coverage of your 18v Cordless Drill Drivers needs, go ahead and review the
Black & Decker CD18CA 18v, Bosch PSR18VE-2 18v Drill Driver, DeWalt DC729KA 18v Drill Driver, Hitachi DS18DMR 18v Drill Driver, the Makita BDF452RFE 18v Drill Driver or the Ryobi CCD-181M One+ 18v Drill Driver

The number of cordless drill drivers is now huge, and all mains powered drills have their cordless battery equivalents. 9.6 volt to 14.4 volt drill/drivers might be utilized as a rotary drill or screwdriver. 12 volt to 18 volt cordless drill drivers can also have a hammer action. 12 and 14.4 volt machines are ok on hammer action for brick but would struggle drilling concrete and other hard masonry, should you need the drill to undertake this type of work then you might look at the 18 volt models that are available. Then there are the 18 volt to 36 volt SDS type of drills. These are made for masonry work, and with a chuck adaptor these might be turned into rotary drill drivers. Also with the SDS type of cordless drill you might get some of them with roto stop which then turns them into a demolition hammer drill.

Electric rotary drill drivers are made mainly for drilling metal and wood. This type of drill is normally small and compact. Motor sizes range from around 500 watts. The lower wattage motors are ok for drilling small holes or minimal use, the more powerful motored machines might cope with larger size holes and more frequent use. The chuck size is another thing to check, the smaller drill drivers have a chuck which might only accept drill bits up to 10mm diameter the larger chuck size is 13mm.

The least expensive drill drivers run at a single speed, but most have two fixed speeds: 300 rpm and 800 rpm. A slide switch or trigger lets you select high or low speed. These drill drivers are ideal for most light-duty operations. The low speed is for driving screws, the high speed for drilling holes. For more refined carpentry and repair tasks, select a drill that has the same two-speed switch and a trigger with variable speed control that lets you vary the speed from 0 rpm to the top of each range. And should you do more hole drilling than screwdriving, look for more speed, 1000 rpm or higher at the top end.

Accessories for drill drivers include drill bits for drilling wood, metal, ceramic, glass, and masonry. In addition to drill bits other accessories include hole saws, screwdriver bits, files, rasps, and sanders.

Lithium ion batteries are commonly utilized in consumer electronics and tools such as drill drivers. They are currently one of the most popular types of battery for portable electronics, with one of the best energy-to-weight ratios, no memory effect, and a slow loss of charge when not in use. In addition to uses for consumer electronics, lithium-ion batteries are growing in popularity for defence, automotive, and aerospace applications due to their high energy density. However certain kinds of mistreatment may cause Li-ion batteries to explode.

If a Li-ion battery is stored with too low a charge, there is a risk of allowing the charge to drop below the battery's low-voltage threshold, resulting in an unrecoverable dead battery. Once the charge has dropped to this level, recharging it might be dangerous. Some batteries therefore feature an internal safety circuit which might prevent charging in this state, and the battery might be for all practical purposes dead. In circumstances where a second Li-ion battery is available for a given device, it is recommended that the unused battery be discharged to 40% and placed in the refrigerator to prolong its shelf life. While the battery might be utilized or charged immediately, some Li-ion batteries might provide more energy when brought to room temperature.

An electric or portable (battery powered) drill can be a scary thing. But they aren’t hard to use. The most common drill drivers come in a pistol shape, making them easy to hold and use. The drill has a trigger you squeeze in order to make the drill bit turn. Sometimes there is also a safety button located on the pistol handle that has to be pressed at the same time you squeeze the trigger in order to make the drill bit turn. The battery pack is usually inserted into a docking station on the bottom of the pistol handle. Between uses the battery pack is charged in another docking station which is connected to an electrical outlet.

To drill a satisfactory hole in any material, the correct type of drill bit must be utilized; it must be utilized correctly and be sharpened as suitable. Many jobs around the house require a hole of some kind to be drilled - whether it is putting up a shelf, building a cabinet or hanging a light fitting. For basic requirements, a set of high-speed steel twist drill bits and some masonry drill bits might probably be sufficient for the average handyman. But for more sophisticated jobs/material, others drill bits might be required - perhaps larger, or made for a specific material/purpose. Good quality drill bits can be expensive, so take care of them, keep them in a case or box should possible, rather than allowing them to roll around loose in a toolbox where the cutting edges may be damaged.

As the name suggests masonry drill bits are made for drilling into brick, block, stone, quarry tiles or concrete. The cutting tip is often made from tungsten carbide bonded to a spiralled steel shaft. Some masonry drill bits are described as 'durium tipped', this term refers to a highly durable silicon bronze alloy utilized instead of tungsten as the cutting point. Masonry drill bits are usually utilized in a power drill; although they might be utilized with a lot of effort in a hand brace. Most masonry drill bits might be utilized with a hammer action power drill driver, but always check as the action is quite punishing on the bit and cheaper drill bits have been known to shatter when subjected to the pounding. Always use a slow rotational speed for drilling into harder materials to avoid overheating the tip and frequently withdraw the bit to remove any dust. Long Masonry drill bits (300 to 400mm) are available for drilling through masonry walls and bit sizes range from 4 to 16mm. Use a drill sharpener or grindstone to sharpen the tungsten carbide tip.

DIY Safety tips:

Although RCDs are a vital safety aid, they can't guarantee 100% protection. Even with them in your home, isn't it better to make a long term investment in good safety practice by looking after appliances such as hedge cutters, hedge trimmers, chainsaws, drill drivers and sanders. Do not work with electricity in damp or wet conditions. If you MUST, always use an RCD. Always place the cable of a hedge trimmer or mower over your shoulder and keep it behind you at all times.
Wear protective clothing including safety goggles, gloves and dust mask when working with potentially hazardous materials such as glass or spray paint. It is also advisable to wear a mask when working in a dusty environment e.g. sawing wood or MDF.

When using a power drill, select a model that has a plastic non-conducting body. Unplug the drill before fitting parts and remove the chuck key before switching it on. Avoid wearing loose clothing or jewellery, which could get caught in the drill.

Do not work with electricity in damp or wet conditions. If you MUST, always use an RCD. Always place the cable of a hedge trimmer or mower over your shoulder and keep it behind you at all times.

Be sure you know the correct way to use all the tools. Many have very sharp blades.

Cordless Drill Drivers

18v drill driver

18v Cordless Drill Drivers

Click to Compare Prices!!

Further Options

Cordless Drill Drivers